This pattern. A great one.
Knit with Noro Silk Garden, colorway… 86?
Size 6 16″ Addi’s.
It has a job, and that is to keep heads warm. And warm it keeps them in my 62 degree office.
Lots, lots, LOTS of things done. And I’m too lazy to get bundled up to walk outside and take decent photos. Also, there are some guys in the backyard digging a hole. Gonna skip that crazy scene.
However, and this was of great interest to me, Cara had a crazy situation with her current knitting project. Go, read, and learn how to dominate your knitting as well.
I’ve fallen behind on rambling about the things that are done around here. Isn’t that some kind of switch? Usually I have nothing to talk about, especially the people I must bore every single day.
Two weeks ago I broke out the dye pot and experimented further with the “hot pour” method.
Now I’m going to work on spinning some of this up.
Not Whitemane’s. Cuter. At least, I think so.
This was mr. rachface’s second requested item-a hat to keep his head and ears toasty in the long awaited cold weather we’re finally having. I knit it up out of my handspun. And not just any handspun, but my very own, very first handspun-plied no less.
I heart it in its own way, akin to a hat we might know as Jayne’s.
There is no pattern. I swatched (!), cast on 2.5 stitches per inch of his head and rounded up, giving me 60 stitches. Then I followed the decreasing on this pattern. Roughly, as the stitch count was somewhat different.
Speaking of that pattern? My head was cold at work, so I pulled out the circular needles and ball of noro I carry around in my pocket for such times and knit a hat. Yes, I carry random balls of yarn around for impromptu projects. Hayley knows what I mean. I haven’t taken a picture. But my head is warm.
So here it is, January. And I’ve been a knitter for a whole durn year.
The idear first came to me when my friend countered my crocheted blanket with her knitted scarf.
And to clarify the matter, I am no expert at crochet. I can chain and double crochet enough to granny square and ripple blanket, but that’s as far as that yarn ambidextory goes.
Learning to knit became a clear intention after a coworker described his new hobby of model aircrafts and asked me if there was a hobby I enjoyed.
Oh, the destruction he has wrought.
I learned to knit from Sally Melville’s book and by watching Lily Chin demonstrate on Knitty Gritty. This was the first episode I ever watched. I took it as fate.
I promptly burned myself out on scarves and didn’t knit for a few months, until I read the Knitty review of Mason Dixon Knitting. This book changed my knitting life.
Once I figured out how to knit anything on a circular needle, I stopped buying straights and I have yet to regret it.
I have knit more washclothes than all other projects combined. Most were given as gifts.
I’m a thrower. It is faster for me to throw than pick, as odd as that may seem.
I do know how to knit continental, just not very quickly. I plan to become faster as I knit the Fair Isle.
I have since discovered that most women in my family have at one time or another participated in some variety of fiber art. It makes me feel like I’m that much closer to them.
I knit socks on two circulars, and to be honest, prefer the Addi Turbo over any other needle (crazy sharp Knit Picks included). They are not too blunt for my taste; I have knit a shawl with a p5tog nupp that they handled just fine.
I have discovered a great deal about GAUGE and knitting too tightly/loosely. ALWAYS knit a GAUGE swatch. And ALWAYS wash it the same way you would wash the finished garmet. When yarn is spun, extra air is hidden inside the wooly fibers. You just never know for sure how the fabric will behave until it has been wetted, throughly dried, and (ZOMG!) blocked.
I’ve discovered that learning something new isn’t always as difficult as it may seem. If I can learn to knit, so can anyone else that sets their mind to it.
FAIR WARNING: This post is all about some pictures.
Below is my method of picking up the stitches around a heel flap. It’s the way that works best for me, and because I tend to always knit a heel flap until I have 15 stitches to pick up I use it on all my socks. I have yet to complain to myself about it, but if you find something to discuss please feel free to drop me a line! fiberjinx AT yahoo DOT com.
The need to eliminate the bane of my sock knitting existence has led me to this end. Behold: That hole should not be there. After I figured out what I was doing, things started looking up:
To begin with, I never understood why pattern directions would tell you to work the heel flap until you have (for example) 15 slipped stitches and then tell you to pick up the same number of stitches on each side. When I executed these instructions I would have already worked a setup row (or two or even three) and then had a couple of extra stitches on the side along with the number of slipped ones called for. I would wind up with baggy heels and about 18 stitches on each side, causing extra decreases and a looser sock.
What I tried this time was counting all heel stitches on the side, including those worked in the set up rows. When I had 15, I turned the heel. This gave me a shorter heel and a better fitting sock.
We now join our sock already in progress to illustrate just what it is I’m talking about.
These are your slipped stitches on the gusset, from the back:
And the front:
Once you’ve knitted your heel flap with the appropriate number of stitches slipped on the sides (not necessarily rows) in this case, 15, turn your heel of choice as usual. Knit across the last row and you’ll be faced with this:
For this sock, there were 15 stitches to be picked up on each side. To tighten them up I twisted them as I picked them up and knit them, per Nancy Bush in her book, Knitting Vintage Socks.
A quick tutorial for twisting picked up stitches: Insert left needle into front leg of stitch:
Place right needle through the back loop
Easy peasy. You could of course just knit them off without twisting, or pick them up in whatever manner you are accustomed. Knitter’s Choice, as Elizabeth Zimmermann says.
This is what they will look like as you work down the heel:
Now we are reaching the top part of the flap and what I call the “corner”, the area between the knitted heel flap and the instep stitches held on other needles (either one circular or any number of DPN’s, depending on your choice of poison). Notice the lowest strand between the two halves of the sock, the purple one:
This is the strand we are looking for. Not to knit into, like I once was told, but to knit next to. Study the first picture and the white V on the left the purple strand runs through, the knit stitch that the arrow covers in the second photo. This is what we are going to pick up and knit into, treating it like another slipped heel stitch and our number 15.
Another view of the strand: Again, we will be knitting into the white knit stitch the purple strand runs through, treating the strand as if it were the normal ladder between two knit stitches.
The astute among you might realize that treating the two halves of the sock this way is basically the same as if it were a knitted row because we will be continuing to knit across the top of the sock on stitches that are right next to each other in the row. The even more involved might notice that if we were trying to line up the stitches as if they were in the same row, we should pick up the stitch below the one I am about to instruct you to. I did try that first and was not please with the results. If this paragraph confuses you, then ignore it and keep going. It’s easy, I promise.
Take up your needles and prepare to knit into the stitch. Note how the white V lays in this photo: Pick up the stitch using the left needle and twist by knitting through the back of the loop, as you have done in the previous 14 stitches.
You will be at the end of the heel flap and ready to knit across the instep of the sock with the stitches not worked with the heel.
Do so, working in your sock’s pattern.
Something to note: IT IS OPTIMAL to twist the two “corner” stitches, even if you don’t twist the others. This tightens them up and prevents the hole we are trying to avoid.
Now we are ready for corner #2.
This one will be a little bit tricky at first if you are using two circulars and like to keep the sole and picked up side stitches on the same needle like I do. I push all the stitches on the needle to one end so I can use the left needle to once again pick up the stitches and knit off onto the right needle. If you use DPN’s I think you would start with a fresh needle. Of course, I have no experience with this, so don’t quote me on it. The other option using two circulars is to use the needle that holds the instep stitches to pick up the second side. Do what is comfortable and makes sense to you.
Moving on. Examine your second “corner” carefully. This time we are looking for the green strand. Here is another view. Again, we are looking for the green strand to find the stitch next to it because that is going to be the one we pick up.
Follow the green strand to the left, or up, and take note of the blue knit stitch the green strand runs through. This is our first stitch on the second side of the heel flap. Pick it up. If you have a hard time getting it with the left needle, use the right needle and then transfer it to the left before knitting and twisting it, as I’ve shown below.
Pick up with right needle:
Switch to left needle and knit into the back:
Knit the stitch off. Note it will be a little loose. This is okay, but make sure that you twisted this stitch and reknit it if you must.
Continue down the sock.
And that’s it. You’ve reached the heel from the second side, which should look something like this:
And after a round of plain knit before you start your decreases, your picked up stitches will look like this: Here is a shot of the first knitted “corner”:
And this is the second “corner”:
Resulting in this:
A sock sans unnecessary holes.
Questions or comments? You can reach me at fiberjinx AT yahoo DOT com.